Description

Technical Parameters

Shaanxi Jinshenghong Cable Co., Ltd. is one of the most reliable manufacturers and suppliers of steel core aluminum 1kv overhead cable in China. Please feel free to wholesale high quality customized products at low price from our factory. For free sample and cheap products, contact us now.

Products Description

Steel Core Aluminum 1kv Overhead Cable Construction:
1.Conductor (both phase and Neutral)
The conductors shall be of aluminum 1350 wires and compacted circular stranded ;
2.Insulation:
The conductors shall be extruded with XLPE as insulation ,each phases is marked with numbers and letters ,

1 ONE,2 TWO,3 THREE or with one rib,two ribs or three ribs to denote the phases.The neutral core carries equally space ribs right round the circumference
3.Assembly
The Core shall be laid up with a left hand Lay.

Standard	NFC 33-209
Phase conductor	Stranded All Aluminum 1350; AAC.
Phase conductor Insulation	XLPE
Neutral conductor	All aluminum alloy
Neutral conductor Insulation	XLPE
Lightning conductor	Stranded All Aluminum 1350; AAC
Lightning conductor insulation	XLPE
The Rated Voltage	0.6/1KV

product-790-724 product-790-552

product-790-829 product-790-790

Products parameter

Steel Core Aluminum 1kv Overhead Cable:

APPLICATION

ALUMINIUM NF C 33-209 service bundled conductors are used for tributary networks of power buildings and their internal networks.

CHARACTERISTICS

The bundled conductor cables have aluminum conductors, insulated with XLPE, they have good durability and thermal resistance.

Some other important cable characteristics are :

Ultraviolet radiation resistance,

Ozone resistance,

High dielectric strength,

Light and easy to handle.

INSTALLATION

The NF C 11-201 standard´s procedures determine the installation procedures for low voltage overhead lines.

These cables are NOT ALLOWED to be buried, even in conduits.

MARKING

Neutral :

211 NF C 33-209 211 « manufacturing number », « metric marks » ink printed.

Phase 1, 2, 3 :

the identification number is printed and embossed on insulation.

Pilot wire n°1 : continuous white line is printed on the insulation

Pilot wire n°2 : no marking

ELECTRICAL CHARACTERISTICS

Rated voltage : 0.6/1 kV

Test voltage : 4 kV AC

Resistance to voltage surges : 1.2/50µs with a positive or negative polarity and a peak value of 20 kV.

Type	Description
AAC	All Aluminum Conductor
ACSR	Aluminum Conductor Steel Reinforced
AAAC	All aluminum Alloy Conductor
ACAR	Aluminum Conductor Alloy Reinforced
AACSR	All Aluminum Alloy Conductor Steel Reinforced
ACSR / AW	Aluminum Conductor Aluminum Clad Steel Reinforced
TACSR	Thermal Resistant Aluminum-alloy Conductor Steel Reinforced
ACSS	Aluminum Conductor Steel Supported
ACSS/AW	Aluminum Conductor. Aluminum-Clad Steel Supported
ACSS/TS	Aluminum Conductor, Steel Supported. Trapezoidal Shaped
ACS	Aluminum Clad Steel
CCS	Copper Clad Steel
GSW	Galvanized Steel Wire
BCC	Bare copper stranded conductor (Hard Drawn)
Greased conductor	Anti-corrosive stranded conductor

product-1248-1408

Products process

Steel Core Aluminum 1kv Overhead Cable

product-1-1

Products application

Application :

Steel Core Aluminum 1kv Overhead Cable are intended for use either as a service drop cable between a power pole and the service entrance, or as a secondary distribution cable between poles.

The use of these service drop or secondary distribution cables is limited to circuits, not exceeding 600 volts phase-to-phase or 480 volts phase-to-ground, to a normal

temperature rating of the service conductor temperature of 90 °C.