Products Description
What is acsr rabbit conductor?
Form the name, we can know the acsr rabbit conductor is aluminum conductor steel reinforced. acsr rabbit conductor belongs to BS-215 standard, which is British standard.
The nominal aluminum area of acsr rabbit conductor is 50 mm2. it strands aluminum and steels with the same diameter. Their diameter is 3.35 mm. Among them, the aluminum number is 6, and the steel number is 1. From the accurate calculation, we can know the overall diameter is 10.05 mm. The sectional area of aluminum is 52.88 mm2, and total sectional area is 61.70 mm2. After the final cabling of acsr rabbit conductor, the total linear mass should be 214 kg/km. You can use this simple data to test if it is qualified. There are other acsr rabbit conductor specifications. For example, the calculated breaking load 1835 daN, and the calculated D.C resistance is 0.5426 Ω/km at 20 ℃. When rabbit conductor is working, the current rating should be 185A.
ACSR Cable Overview
Aluminum conductor steel reinforced (or ACSR) cable is a specific type of high-capacity, high-strength stranded cable typically used in overhead power lines. The outer strands of ACSR cable are aluminum, chosen for its excellent conductivity, low weight and low cost. The center strand is of steel for the strength required to support the weight without stretching the aluminum due to its ductility. This gives the cable an overall high tensile strength.
ACSR construction uses aluminum alloy 1350-H19 wires, concentrically stranded around a steel core. Core wire for ACSR is available with class A, B, or C galvanizing; aluminum coated (AZ); or aluminum-clad steel core (AL). Additional corrosion protection is available through the application of grease to the corer or infusion of the complete cable with grease.
The higher resistance of the steel core is of no consequence to the transmission of electricity since it is located far below the skin depth where essentially no AC current flows.
Specifications:
B-230: Aluminum wire, 1350-H19 for Electrical Purposes
B-231: Aluminum conductors, Concentric-Lay-Stranded
B-232: Aluminum conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR)
B-341: Aluminum-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)
B-498: Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B-500: Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)
RUS ACCEPTED
What is the specification of acsr rabbit conductor?
| Code name | acsr rabbit conductor | |
| Nominal aluminum area mm 2 | 50 | |
| Stranding structure | Al. No. | 6 |
| Al. Dia. | 3.35 | |
| St. No. | 1 | |
| St. Dia | 3.35 | |
| Sectional area of aluminum | mm 2 | 52.88 |
| Total sectional area | mm 2 | 61.7 |
| Overall diameter | mm | 10.05 |
| kg/km | 214 | |
| Calculated breaking load | daN | 1835 |
| Calculate D.C resistance at 20 ℃ | Ω/km | 0.5426 |
| Current Rating | A | 185 |
Products parameter
Technical Parameters:
The technical data of Aluminium Conductor Acsr Rabbit Conductor Power cable power wire astm b232 acsr overhead conductor as below for reference,any customized is available.
IEC 61089Standard
Products process
Aluminium Conductor Acsr Rabbit Conductor Cable Stranded Steel Core Aluminum
Products application
Application :
Aluminium Conductor Acsr Rabbit Conductor Cable as a new-type aerial cable is used for transmitting electric power overhead,
extensively used in rebuilding of urban and forest region electrified wire nttting.
It improves the safety and reliance of electrified wire netting.
|
Applications of bare conductor |
To supply 120 volt aerial service for temporary service at construction sites,outdoor or street lighting . For service at 600
volts or lower at a conductor temperature of 75°C maximum. |
||||||||
|
Applications of bare conductor |
To supply power from the utility's lines to the consumer's weatherhead. For service at 600 volt or less (phase to phase) at a
conductor temperature of 75°C maximum for polyethylene insulation 90°C maximum for crosslinked insulation. |
||||||||
|
Applications of bare conductor |
Used to supply 3 phase power, usually from a polemounted transformer, to the user's service head where connection to the service
entrance cable is made. To be used at voltages of 600 volts or less phase to phase and at conductor temperatures not to exceed 75°C for polyethylene insulation 90°C maximum for crosslinked polyethylene(XLPE) insulated conductors |
||||||||
Products package
Aluminium Conductor Acsr Rabbit Conductor Cable packaging records shown:
FAQ
Q:I didn't find the cable which I need in this page?
Contact us
Hot Tags: aluminium conductor acsr rabbit conductor cable, China aluminium conductor acsr rabbit conductor cable manufacturers, suppliers, ABC Power Cable, Steel Core Aluminum 1kv Overhead Cable, Stranded Steel Core Aluminum, AAC AAAC ACSR Aluminum Power Cable, Steel Core Aluminum Strand
